Frequently asked questions

Phones and electronics

Short answers on IMEI and serial numbers, buying used phones, trade-ins, warranty and the ready-made phone catalogue. For step-by-step guides, see the help centre.

All 33 questions

Can I buy a used phone from a customer in SellyPOS?

Yes, SellyPOS lets you buy a used phone from a customer. In Basic and Professional, the phone goes through the device panel on Quick purchase, and it enters stock with no price until the shop sets one. The customer's statement lists the purchase as a grey line that changes no balance. See how to buy a used phone from a customer.

Can a cashier take a trade-in without a manager?

Yes, a cashier can take a trade-in without a manager, up to the limit the shop sets for trade-ins. Anything above that limit needs a manager's approval, given in a window over the sale without losing it. The limit ships empty, which means there is none until the shop sets one, so until then no trade-in asks for approval. This is in Basic and Professional.

What should I check before I take an old phone in trade?

Before you take an old phone in trade, check that it is not locked to a carrier and that the seller has removed their accounts and personal data. In Basic and Professional, SellyPOS records carrier lock and locks cleared as yes or no boxes on the device. A device with its locks not cleared shows a quiet note on the cart line, which informs the buyer and never stops the sale.

How do I check if a phone is PTA approved?

To check whether a phone is PTA approved, use one of PTA's three ways, as its own page describes (read on 5 November 2026). Send the 15-digit IMEI by SMS to 8484, search the IMEI on the DIRBS website, or use the DVS app. SellyPOS does not run the check, so record the result yourself. See how to check a phone's IMEI and PTA status.

What is a checking warranty on a phone?

A checking warranty is a short cover that a shop gives for a few days after a sale, so that a phone which fails the check can be swapped or refunded. Its length belongs to the shop, because trade usage does not standardise it. In SellyPOS, enter it as a warranty cover with its own name and a length in days.

What is the difference between company warranty and shop warranty?

Company warranty and shop warranty are different promises made by different people. Company warranty is the brand's own cover, served at its local service centres. Shop warranty is the seller's own cover for a period the shop sets. Trade sources read on 5 November 2026 describe both this way. In SellyPOS, record each as its own warranty cover, with its own name and length.

What condition names does SellyPOS use for a phone?

SellyPOS records a phone's condition as New, Box Open, Used or Refurbished. In Basic and Professional, a device can record one of these, the cart line shows it, and a sold device keeps the condition it had at the sale. Promotions and warranty covers can also be limited to new devices or to used ones.

Can I give a different warranty to a new phone and a used one?

In Basic and Professional, a shop can give new phones and used phones different warranties. Each warranty cover on a device is for new devices, used devices or every device, and each cover has its own name and length. A sold phone keeps the end date its cover gave it.

Does SellyPOS keep warranty claims?

SellyPOS does not keep warranty claims as a document. It keeps each warranty cover's end date on the sold item, and the receipt shows that copy of the end date. A shop that wants a record of a claim keeps that record on paper or in another file.

Can I find a phone by the last digits of its IMEI?

Yes, SellyPOS can find a phone by the last digits of its code. In Basic and Professional, type the last digits and the Find product window finds the device, listing that product's units with the one you typed first. See how to find a phone by its last digits.

What happens when I add a phone whose IMEI the shop already holds?

In Basic and Professional, when you add a phone whose IMEI the shop already holds, SellyPOS shows the code as a conflict beside the line. A code belongs to one device only. You can remove the line, open the device holding the code, or receive the phone again. A phone that has left the shop comes back as the same device.

How many IMEI numbers can one phone have in SellyPOS?

A phone in SellyPOS can have one or two IMEI numbers, and at least one is needed. In Basic and Professional, a phone is recorded by its serial number and its IMEIs, and several codes can be typed in one box, separated by commas. Dual-SIM phones have more than one IMEI, and PTA's own page, read on 5 November 2026, says each one must be checked.

What is the difference between a JV phone and a factory unlocked phone?

A JV phone and a factory unlocked phone are different things in the market. Market usage, read on 5 November 2026, uses JV for a phone locked to one mobile carrier, usually imported and often sold informally. A factory unlocked phone is not locked to a carrier, so a SIM from any network works in it. It can still be non-PTA, so ask about PTA status separately.

What if the old phone is worth more than the sale?

When an old phone is worth more than the sale, the surplus is paid out to the customer. In Basic and Professional, the surplus is paid out in cash, or by bank or wallet as the cashier chooses. It is never given as store credit. The sale itself still keeps its full price.

Can a customer pay for a sale with an old phone?

Yes, a customer can pay for a sale with an old phone in Basic and Professional. The cashier scans the old device as a trade-in on the payment step, and the sale keeps its full price while the shop buys the device at the agreed value. Only phones, tablets and laptops can be taken in trade. A void reverses every ledger entry the trade-in made.

How do I price a used phone I bought from a customer?

A used phone you buy from a customer is priced on its own record. In Basic and Professional, a bought-back phone is costed at the cost it came in at, not the product's average, so the cost of that sale is what was paid for it. Its minimum price is the floor for any counter discount. A phone bought from a customer has no selling price until the shop sets it on Products, Devices, Incomplete.

Does the receipt print each phone's warranty end date?

In Basic and Professional, the receipt prints each phone's warranty end date. A phone on a receipt prints its IMEI numbers and serial number, what the phone is, and each warranty cover with its end date. The receipt designer has a box for each device detail, warranty among them, so a shop can choose what prints.

Does SellyPOS record a phone's PTA status?

Yes, SellyPOS records a phone's PTA status as a yes or no box, in Basic and Professional. The PTA approved box is asked for and shown only when the shop's country is Pakistan. SellyPOS does not check the status itself, so you tick the box after you have checked the IMEI yourself.

Does SellyPOS check a phone with PTA?

No, SellyPOS does not check a phone with PTA, and a PTA register check from the app is not built. You check the IMEI yourself: send the 15 digits by SMS to 8484, search the DIRBS website, or use the DVS app, as PTA's own page describes (read on 5 November 2026). Then, in Basic and Professional, tick PTA approved on the phone's record.

Can I set a shop warranty and a brand warranty on one phone?

A product can have several warranty covers in every edition, each with its own name and a length in days, so one can be named for the shop and one for the brand. In Basic and Professional, each phone keeps its own end date for each cover on the sale and the receipt. The warranty help article shows the steps.

What does To check mean for a returned phone?

To check is the state a returned phone goes to when it cannot be sold as it is. In Basic and Professional, a returned device that is not sellable goes there, and the Check this device action puts it back in stock once it has been checked. A defective phone goes to To check at its cost, and its refund needs a manager. See how a returned phone is taken back.

Can a used phone carry the brand warranty it has left?

In Basic and Professional, a used phone can carry the end date of the brand warranty it has left. Whether the next buyer can still claim it depends on the brand's terms, and some brand terms read on 5 November 2026 say a warranty is not transferable. SellyPOS keeps the end date the shop types and does not check the brand's terms.

What does open box mean for a phone?

Open box means the phone's box has been opened, usually because it is a returned or display unit, and it is usually unused. Trade sources read on 5 November 2026 say such a phone is often sold with a shorter warranty, and that the length is not standardised. In Basic and Professional, SellyPOS records its condition as Box Open, one of four device conditions.

What is a box pack phone?

A box pack phone is a phone sold still sealed in its factory packaging. The seal shows the phone is unopened, but it does not say which warranty comes with it, so check the warranty separately. In SellyPOS, that warranty can be recorded as a warranty cover with its own name and length. The box pack, open box and refurbished guide covers the rest.

What is a refurbished phone?

A refurbished phone is a used phone that has been brought back to good order and sold again. Trade sources read on 5 November 2026 say sellers of used phones often offer short checking or replacement windows. In Basic and Professional, SellyPOS records refurbished as one of the four device conditions, and a condition note can be kept on the unit.

What is an IMEI number?

An IMEI number is a 15-digit number that identifies one mobile phone. Dial *#06# on the phone to see it. A dual-SIM phone has more than one IMEI number, and each one must be checked, as PTA's own page says (read on 5 November 2026). SellyPOS records each phone by its own IMEI, so two phones never share one.

What does non-PTA mean?

Non-PTA is a market word for a phone that is not registered with PTA. PTA's own FAQ says a device that is not registered must be registered within 60 days, or it is blocked (read on 5 November 2026). The word describes registration with PTA, not the condition of the phone. Sellers and buyers use it in that sense.

What is a trade-in?

A trade-in is an old phone, tablet or laptop that a customer hands over to pay for a sale. In Basic and Professional, the cashier chooses Trade-in on the payment step and scans the old device. The sale keeps its full price, and the shop buys the device into stock at the agreed value. Only phones, tablets and laptops can be taken in trade. See how to take a trade-in.

Who can see the seller's identification number?

A customer's identification number is seen only by staff with permission to view personal details. Staff without that permission do not see it, and they do not see the phone number, address or email either. When such staff reveal a value, the reveal is audited without recording the value. On a trade-in, the seller's number is filled in from their customer record, and receipts and invoices never print it.

Do accessories sold in a mobile phone shop need device codes?

Accessories in a mobile phone shop are ordinary products, with their own price and stock, and they need no device code. Only a product tracked by serial number carries a device type, and that type decides which codes each unit needs. Device tracking is in Basic and Professional. See mobile shop POS software with IMEI tracking.

How do I sell a used phone at the price I paid for it?

Each device is costed at the cost it came in at, not at the product's average. So a used phone you buy back is sold at what you paid, and a returned or voided device goes back in at the same cost. For each device you record its condition (new sealed, new open box, used or refurbished), its minimum price, its battery, a faults and repairs note, and whether it is carrier locked and whether its locks are cleared. On Quick purchase, scanning a phone's code opens the device panel. A phone that has left your stock earlier is received again as the same device. Each warranty cover is for new devices, used devices or every device, and a used device can carry the end date of its own warranty. See how to track phones by IMEI.

Can a customer pay for a sale with their old phone?

Yes. The cashier chooses Trade-in on the payment step, scans the old device and fills in one form. The sale keeps its full price, and the shop buys the device into stock at the agreed value. If the old device is worth more than the sale, the surplus is paid out in cash, or by bank or wallet as the cashier chooses. It is never given as store credit. The seller's national ID number is filled in from their customer record. Receipts show each trade-in with one code and any payout, never the national ID number. See phone trade-in at the POS.

Can I track each phone in my shop by its IMEI number?

Yes. Each device is recorded by its own code: a phone by its serial number and one or two IMEI numbers, a laptop by its serial number, and a router by its MAC address. A code belongs to one device only, so the same IMEI cannot be recorded against two phones. The Devices list shows each device's state, and you can filter by state or type, or scan a code to open its page. A device's page lists each time it came into your shop, with the profit on each round for people who may see cost. See mobile shop POS software with IMEI tracking.

Start selling with SellyPOS today

An installed Windows app with a modern interface, made to sell from the keyboard. It keeps selling with no internet.

Windows 10 (version 1809 or later) or Windows 11, 64-bit.