Hardware

How to connect a receipt printer to POS

Add a receipt printer over USB or Bluetooth, name it, pick 58 mm or 80 mm paper, print a test page and save it. Cut settings too.

Short answer To connect a receipt printer to POS, plug it in over USB, or pair it in Windows for Bluetooth. Then open Setup, then Hardware, and choose Add a printer. SellyPOS finds it, you name it, pick 58 mm or 80 mm paper, print a test page and save. Every edition has this.

Applies to Lite, Basic, Professional

Watch it done

Video walkthrough in Urdu: SellyPOS mein receipt printer add karein, printing rules

This guide shows how to connect a receipt printer to POS, so that receipts print from the till. You add the printer on the Hardware page, name it, print a test page and save it. Adding a receipt printer works in Lite, Basic and Professional. Receipts print on thermal printers that are 58 mm or 80 mm wide.

What you need

  • Edition: Lite, Basic or Professional. See the editions.
  • Permission: the hardware setting (settings.hardware) to save a printer and print a test page.
  • Printer: a thermal receipt printer, 58 mm or 80 mm wide, connected by USB. A Bluetooth printer must be paired in Windows first.

How do I add a receipt printer?

To add a receipt printer, plug a USB printer into the till, or pair a Bluetooth printer in Windows. Then open Setup, then Hardware, and choose Add a printer. SellyPOS finds a USB printer without an address. You name the printer, test it and save it.

  1. Connect the printer. Plug the USB receipt printer into the till. For a Bluetooth printer, switch it on and pair it in Windows first.

  2. Open Setup, then Hardware. On the Devices tab, choose Add a printer.

  3. Choose how it is connected. Under How it is connected, pick USB, Bluetooth, network or a Windows printer.

  4. Find it. SellyPOS lists the printer it found. If it is not listed, choose Look again. For a Bluetooth printer, choose Look again after you pair it.

  5. Name it and test it. Type a name, choose the paper width, 58 mm or 80 mm, and choose Test print.

  6. Save the printer. Choose Save printer.

Which receipt printer widths does SellyPOS work with?

Receipts print on thermal receipt printers that are 58 mm or 80 mm wide, over USB or Bluetooth. Serial printers are not supported yet. You pick the paper width when you name the printer, and you can change it later on that printer’s own page.

How do I change how a receipt printer cuts the paper?

To change how a receipt printer cuts the paper, open that printer from the Printers list on the Hardware page. You can change its name, paper, cut and default setting there. Under More settings, you set letters per line and blank lines before the cut.

If something is not as you expect

  • The printer does not appear in the list. Choose Look again. The list does not refresh by itself when a printer is plugged in or unplugged.
  • A printer that needs administrator rights must be set up through Windows. Set that printer up in Windows, then look for it again.
  • Bluetooth pairing cannot be done inside SellyPOS. Pair the printer in Windows first. Printers that use only Bluetooth Low Energy are not supported.
  • Serial printers are not supported yet. Use a 58 mm or 80 mm thermal printer over USB or Bluetooth.

Next

For how receipts reach the printer, see receipt printing on USB and Bluetooth printers. For every hardware choice in one place, see the hardware module. To print a receipt again, read how to print or reprint a receipt.

Pricing shows what each edition costs. Download SellyPOS gets the program.

Questions people ask

Do I need a receipt printer or a barcode scanner?

No. Without a barcode scanner, you find products by typing their name or code, and receipt printing can be turned off when no printer is connected. When you add a receipt printer, SellyPOS works with 58 mm and 80 mm thermal printers over USB or Bluetooth. Hardware it works with.

Start selling with SellyPOS today

An installed Windows app with a modern interface, made to sell from the keyboard. It keeps selling with no internet.

Windows 10 (version 1809 or later) or Windows 11, 64-bit.