# POS printer driver: install a receipt printer on Windows

> Install a POS printer driver for a receipt printer on Windows, then let SellyPOS find it over USB or pair it over Bluetooth. Use 58 mm or 80 mm paper.

**Short answer:** To install a POS printer driver, first let Windows add the receipt printer. If Windows does not add it, install the driver from the printer's maker. Then SellyPOS finds a USB printer, or lists a Bluetooth printer once it is paired in Windows.

Source: https://sellypos.com/help/hardware/install-a-receipt-printer-on-windows/
Updated: 2026-11-04

This guide shows the order that works for a receipt printer on Windows: power and paper, the connection, Windows, and then SellyPOS. Install a printer driver only when Windows does not add the printer itself. Every step is in Lite, Basic and Professional.

## What you need

- **Edition:** Lite, Basic or Professional. Every step is in all three.
- **Permission:** Windows administrator rights, if the printer needs them. Printers that need them must be set up through Windows.
- **Paper:** a thermal roll that is 58 mm or 80 mm wide.

## What order should I set up a receipt printer in?

Set up a receipt printer in this order: switch it on with paper loaded, connect it, let Windows add it, and then let SellyPOS find it. Install the printer's own driver only if Windows does not add it. SellyPOS finds a USB printer by itself, and lists a Bluetooth printer once it is paired in Windows.

## Does SellyPOS find a USB printer by itself?

A USB receipt printer is found by SellyPOS without an address. Plug the printer into the till, then open Setup, then Hardware. You name it, pick the paper, print a test page and save. The list does not refresh by itself, so choose **Look again** after you plug in.

1. **Switch the printer on and load the paper.** Load a 58 mm or 80 mm roll, to match the printer.

2. **Plug the USB cable into the till.** Let Windows add the printer. If Windows does not add it, install the printer's driver from its maker.

3. **Open Setup, then Hardware.** Choose **Look again** if the printer is not listed.

4. **Name the printer and pick the paper.** Choose the connection, find the printer, give it a name, and pick the **Paper width**.

5. **Print a test page and save.** Choose **Test print**, then **Save printer**.

Every step above is in all three editions. Later, the paper and cut settings are changed on the printer's own page.

## Does SellyPOS find a Bluetooth printer?

A Bluetooth receipt printer is found by SellyPOS once it is paired with the computer in Windows. It is then listed on the Hardware page beside the USB printers. Pairing itself is not done inside SellyPOS, and unpaired printers are not searched for.

1. **Switch the printer on and turn Bluetooth on in Windows.** If Bluetooth is off, SellyPOS says so on the Hardware page.

2. **Pair the printer in Windows.** Pairing is done in Windows, not in SellyPOS. SellyPOS can open Windows' Bluetooth settings for you from the Hardware page.

3. **Choose Look again in SellyPOS.** Go to Setup, then Hardware. The paired printer is listed beside the USB printers.

4. **Name it, pick the paper, print a test page and save.** Do this as in the USB steps above.

Every step above is in all three editions.

## If something is not as you expect

- **Windows says the printer needs administrator rights.** Set it up through Windows.
- **The USB printer is not listed after you plug it in.** The list does not refresh by itself. Choose **Look again**.
- **The Bluetooth printer shows as no longer paired.** Pair it again in Windows, then choose **Look again**.
- **The Bluetooth printer uses only Bluetooth Low Energy.** Printers that use only Bluetooth Low Energy are not supported.
- **The printer is a serial printer.** Serial printers are not supported yet.

## Next

For the full connection steps inside SellyPOS, see [how to connect a receipt printer to POS](/help/hardware/add-a-printer-and-print-a-test-receipt/). If the printer still does not print, read [receipt printer not printing, or printing faint](/help/hardware/receipt-printer-not-printing-or-printing-faint/). For the feature, see [receipt printing on USB and Bluetooth printers](/features/receipt-printing/).

For the roll width, read [58 mm or 80 mm thermal paper: which roll to buy](/blog/58-mm-or-80-mm-thermal-paper-which-roll-for-your-shop/). For every hardware item in one place, see [the hardware module](/features/hardware/).

[Pricing](/pricing/) shows what each edition costs. [Download SellyPOS](/download/) to try it.
